Model Number: JN-S-T608M
Brand Name: OEM
Key Specifications/Special Features:
Product function and advantagePatent appearance design, cheap price, economic afford3 Three unit and one machinecontrol, support large power electric equipment, the low power consumptionThe rang of remote control is 15.2m in outdoorHigh strength high temperature resistant ABS material shell, waterproof and anti-thunder design
High electric conduction rate sheet copper, rust proof copper, The copper structure optimization design for longer life and higher safety performance.
This device has been tested And conform tothe limit for the B digital equipmentThese restrictions designed to providing reasonable protection and avoiding harmful interference, this device may not cause harmful radio interference, but the equipment may be interference due to interference from other radio waves, resulting to garbled or mistakes, so please away from sources of radio interference.For example radio, television reception, may produce harmful interference to the product,
Please do not use this product in the same residential place, should be installed in different places, the distance between the two installation should not be less than 15 meters, so as not to make mistakesinterfere with each other between the two machines. Therefore it is recommended that users do not place or use the same place at the same time. Therefore, please follow the instructions in strict accordance with the operation.
||Switzerland standard wifi remote control power switch
||US standard plug
||wifi 2.4GHZ b/g/h
||remote control on/off, timing, power statistics
||gift box size
||51*24*36.5cm(contain 50 sets)
The application method of Remote control
- remote control built-in a 3V button battery, can use 8-10 months under normal circumstances, the effective distance is 8-15m between remote and main engine.
- the remote control panel button "ON"means open,"OFF" means close, "A" and "B" group "ON", "OFF" means that the control corresponding to the host "1" and "3" "2" open and close.
- remote controlwith the host corresponding to the remote numberon the back, say: remote control 1 pullnumber 1, and the host must be number 1, pull the 1 trumpet, it can realizeremote control.
- batteries should be replacedafter using, unplug the transmitter battery stuck below. Insert a new 3V battery, ensure the battery + and--, not be anti loaded, battery and stuck into the remote machine and press the "on" or "off" button, to ensure that the diode pilot lamp lights.
- do not mixed use old batteries and new batteries or carbon zinc and alkaline battery , if the product is not used for a long time, to remove the battery in addition to storage.
- remove the battery from the product, the battery may explode, please do not put into the fire. May also leak please pay attention to environmental protection.
|Receiving host instructions|
- the inputmetal plug at the backof the host powershould be inserted in the corresponding 2 holes or 3 hole socket, and ensurecontactwell
- switch on the power supply host LED red indicator light is bright, or not it indicates that there is bad contact and other issues, should be immediately checked.
- white on the main surface of the main shell are distinguished "1" "2" "3" three machines and the corresponding remote control.
- the output power of the positive socket of the host is used for connecting the load electric appliance, but must pay attention to ensure that the total watts of the inserted electrical equipment or other connected loads shall not be greater than the rated power values specified in this product.
Matters needing attention
- The sum of the electrical power received by the product shall not exceed the rated power
- This product is an electronic product, not used as children's toys.
- Please use the indoor and dry environment
- Do not disassemble, please find a professional electrician or professional